MARBLO CARE & MAINTENANCE
Please take the time to read our care & maintenance recommendations for your Marblo materials.
Copies can be downloaded from this site. (Care & Maintenance)
.........................................................................................................................................................................................................
Created to be non-porous, Marblo will prohibit liquids and chemicals being absorbed. The result is an easy care and hygienic surface. Although Marblo is tough and durable, it is not indestructible. Regular maintenance will be required to keep the product’s surfaces at their best.Colour selection and lustre finish will determine the amount of attention and care required for your Marblo surface.
As with most materials, darker colours will require additional attention.Please read the recommendations below to ensure that you enjoy years of service from your investment in Marblo.
1. Day-to-day
Simply clean your Marblo surface with warm soapy water using a damp sponge.
For regular cleaning, wipe over the surface with an ammonia-based cleaner such as Spray-and-WipeTM*. Wipe clean with a damp sponge.
2. Spills
In the event of a spill of harsh household chemicals, dyes or the like, in most cases lasting
damage can be prevented with minimal effort. Immediately clean with a damp sponge, using appropriate safety measures and wipe clean.
If the spill has not been removed, clean the entire surface with Lemon Jif®** Cream Cleanser and a wet sponge, using a circular motion. To maintain uniformity, do not apply too much pressure nor rub in the same area for a prolonged time. Clean well and wipe dry. This will restore a matte / sheen lustre to the surface of your product.
If your Marblo product is a gloss finish, please contact our customer support team for specific advice or contact your local Marblo accredited fabricator.
3. Stubborn Stains, Light scuffs & Cigarette Burns
Apply Lemon Jif®** to the entire surface, using a damp grey Scotch-Brite*** pad rub in a wide circular motion. Be sure not to apply too much pressure nor rub in the same area for a prolonged time. Before rinsing, clean the entire surface using a wet sponge in a wide circular motion. Clean well using a damp sponge.
A matte / sheen lustre will result. For gloss finishes, additional procedures will be required.
4. Scratches and Rejuvenation
After years of service, you can rejuvenate your Marblo surface an as-new finish. You may wish to arrange for a trained Marblo fabricator to complete a professional resanding and re-polishing of your Marblo surface.
5. Prevention
Do not use abrasive cleaners, steel-wool or objects with sharp edges on the surface of Marblo. Do not cut directly on your Marblo surface, use a cutting board. Excessive heat, naked flames, ultraviolet radiation or harsh chemicals may also cause damage to your Marblo surface. In most cases, Marblo can be rejuvenated by your local Marblo accredited fabricator.
6. Hot Pans & Heat Producing Appliances
Hot pans, pots or oven trays or other hot items should not be placed on your Marblo surface. Appliances which emit heat such as fry pans, toaster ovens, grills, slow cookers and the like should not be used directly on the Marblo surface. The use of a heat pad is recommended.
In the unlikely event of a problem with your Marblo Product or to learn more about caring
for your Product, please contact our customer support team on (08) 9371 8000 or visit
HYPERLINK http://www.marblo.com www.marblo.com
* ”Spray & Wipe is a registered trademark of Colgate-Palmolive.
** “Jif” is a registered trademark of Unilever.
*** “Scotch-brite” Registered tra demark of the 3M Company.
